Product Introduction
The fabric we used for workwear is an anti static fabric, conceived to protect products that are highly sensitive to electrostatic charges. It is capable of transporting these electrostatic charges through its conductive filaments to ground them, functioning as a continuous discharge channel.Product Advantages
Constructed using a base of continuous-filament polyester fibres and anti static fibres, it is converted into a semiconductive fabric, ideal for working in laboratories or workshops where sensitive components are handled: electronics and microelectronics laboratories, chemical laboratories, electrical workshops, clean rooms, painting booths, automotives, etc. What makes this fabric family unique is the thread construction, which instead of being monofilaments, are produced using a multifilament version. What this does is simulate the feel of cotton and promote fabric breathability, and as a result, comfort. This softshell with flame retardant and anti-static properties. The light material has a water-repellent outer fabric, is windproof and offers good cold protection. The softshell is equipped with one inset chest pocket, two inset pockets on the side, one inside pocket and a loop for a badge, and has been finished with reflective FR strips. The sleeves can be narrowed with touch and close fastening and if you get too hot, you can remove them.Features and Benefits
Product Display
Certification
EN ISO 14116: 2015 EN 1149-5: 2008 EN 13034: 2005 + A1: 2009 EN ISO 20471: 2013 + A1: 2016/Class 3EN 343: 2003 + A1: 2007 EN ISO 14116: 2015 EN 14058: 2017/Class 11 EN ISO 13688: 2013● Straight collar. ● Zip closure under flap with touch & close fastening. ● 1 inset chest pocket with zip closure; 2 inset pockets. ● 1 loop for badge. ● Detachable sleeves. ● Sleeve narrowing by touch and close fastening. ● Flame retardant reflective tape (50mm). ● Back length 75 cm (L). ● Interior:1 inside pocket. ● 3-layer softshell: polyester fabric, breathable FR PU, inherent FR fleece.
